Archive

Fly Fishing

Spooky Reds

August 30, 2013
Fishing, Fly Fishing, Kayak Fishing, Multimedia, Music, Saltwater, Video
3 Comments

Got around to editing some footage from a trip in July. While working down in Grand Isle I got an evening to get out and stalk some reds. It was windy that day, the tide was high, and clouds were intermittent – basically conditions were working against me when it comes to sightfishing. However, I managed to one flat that was full of individual mangrove plants and had a few small reds too. This flat probably only floods on a high tide so I was in luck that it actually had water on it. The reds were a bit spooky because the water on the flat was shallow and clear and there really wasn’t much sneaking around I could do. After a bunch of refusals I finally had some success and now have a spot in the back of my mind for when the tide is super high.

SS Goby SBS

August 25, 2013
Fishing, Fly Fishing, Fly Tying
Leave a comment

The fly of the month for August is the first we’ve had featuring Fish Skull products, Blake writes, “I’ve caught a few reds that had gobies in their belly, so I figured that I would give one a shot using the sculpin helmets that I bought. I ended up with the SS (Simple Sculpin) Goby.”

 Materials:

  1. Your favorite jig hook (The Mustad 34011 will also work, just bend it into a jig hook)
  2. Magnum and crosscut zonker strips
  3. Flash
  4. Thread
  5. Sculpin head

Step 1. Puncture a hole in the zonker hides using a bodkin and push the hook point through from the skin side to the hair side. Mount the hook in the vise.

IMG_1054

Step 2. Start thread and lay down a good base along the hook shank.

IMG_1055

Step 3. Tie in flash on either side of the shank.

IMG_1056

Step 4. Tie in the crosscut zonker skin side up with the fibers pointing away from you. This will ensure that the fibers will lay back toward the bend when palmered up the shank.

IMG_1057

Step 5. Palmer the zonker down the shank in overlapping turns. I lay down a layer of super glue on the shank to help things stay in place. Tie in the strip leaving enough room behind the eye to fit the sculpin head. I like to slide the head on now and make sure that I have enough room.

IMG_1058

Step 6. Bring zonker strip over and tie in at the same spot.

IMG_1059

Step 7. Tie in a clump of rabbit hair on either side of the fly at the same spot that everything else is tied in. The tie-in area doesn’t need to be neat and tidy as the helmet will cover everything up. Just make sure that the tie-in area is not too bulky as to inhibit the head from fitting snug to the materials. Tie off the thread.

IMG_1060

IMG_1061

IMG_1062

Step 8. Coat the tie in with superglue. I also like to put some superglue in the inside of the sculpin helmet. Push the helmet on to the fly making sure to butt it up nicely against all the rabbit hair.

IMG_1063

IMG_1065

Step 9. Start thread in front of the helmet and wrap a thread dam to keep the head in place.

IMG_1066

Step 10. Add a small amount of super glue in each eye socket and place the eyes in their spots. Coat the thread wraps with some SHAN and the fly is ready to go. Finished Fly

IMG_1067

IMG_1068

IMG_1069

Teton Valley

August 22, 2013
Coldwater, Exploring, Fishing, Fly Fishing, Food and Drink, Freshwater, Hiking
Leave a comment

Wednesday was a travel day for us, back to Salt Lake City from Island Park. With flights leaving out of SLC Thursday morning I thought it best to stay there the night before. It also provided a good opportunity that night to meet up with friends from high school who now live in Salt Lake. Instead of heading down Hwy 20 to I-15 at Idaho Falls though we took a more circuitous route which would take us through Teton Valley, on the west side of the Tetons, and put us in prime cutthroat territory. So, much like day one, I found us a roadside stream where we could fish and hopefully bag another species.

We started off our trip with a stop at Trouthunter to load up on flies before the trip home. One thing I loved about the Yellowstone area was that there is no shortage of fly shops. Good fly shops too and Trouthunter, which was right down the road, might be the best.

IMG_1537

Our next stop was Mesa Falls. This is definitely a must-see attraction for the area. The park surrounding the falls is a top notch facility and the falls themselves are very impressive. A short trail will take you right next to the falls and you can really feel the energy in the water and the chill in the air.

IMG_1552

IMG_1718

IMG_1094

IMG_1544

IMG_1549

IMG_1730

IMG_1555

IMG_1558

From one of Idaho’s scenic byways to another we then headed to Teton Valley to get a view of the Tetons from the west. According to our guide Derek while in the area we had to stop at the Victor Emporium for huckleberry milkshakes. When milkshakes are involved you don’t have to tell me twice, so we had to stop. I was curious about huckleberries anyway since it seemed people from Idaho were more obsessed with huckleberries than potatoes. They’re pretty darn good too, like little blueberries, they go great in a milkshake.  What Derek didn’t mention was that the Emporium was also a fly shop! Thinking about it now, the Victor Emporium may have supplanted Trouthunter as the best fly shop for the Yellowstone area because milkshakes and flies go together like peanut butter and jelly.

IMG_1560

IMG_2775

Once we left Teton Valley and entered into the Snake River watershed it was time to find our feeder stream to fish. The creek was relatively flat, bordered by willows and had deeper sections where there were beaver dams. Fishing a hopper, it didn’t take long to for my fly to get that familiar bump from the smaller trout. Soon enough I hooked up with a little bigger cutthroat and had my first Snake River Finespotted Cutt.

IMG_1561

IMG_1744

IMG_1563

IMG_1562

IMG_1573

IMG_1565

IMG_1750

After catching a few cutthroat I let Dad take the lead on the creek and I tried to help Mom get a fish. I think fishing these smaller creeks with regular tackle is actually tougher than fly fishing, but Mom refused to use my fly rod. She got a few follows at her spinner, fish just wouldn’t commit to it though. Dad ended up bringing one to hand, but it flopped out before we could get a picture, but I was glad he caught one.

IMG_1569

IMG_1567

After a couple hours of fishing we hopped back in the car to make it back to SLC in time to meet my friends. They had the four of us over for dinner and really went out of the way laying out a nice spread and making us welcome. It was really awesome seeing my friends Eric and Sterling again, I was kind of bummed I didn’t get to make it to my 10 year reunion, so this was a good consolation.

A good bit of planning was involved in this trip and it was worth it because it ended up being a ton of fun. We saw so many new, awesome things, it’s hard to sum it all up. I felt we needed to do something big before having our baby in November and this was perfect. I’m already itching to go back out there, but next time I want to go after the Cutt Slam, hopefully I can find a fishing buddy that is up for the challenge.

IMG_1481

One last note, I forgot to mention the cabin we stayed at in Last Chance was Kim and Mary’s Cabin. We really enjoyed staying here, it suited our needs very well. It is in the Last Chance area of Island Park, there is access to the Henry’s Fork right down the street and you have three fly shops within a mile. The cabin still looks brand new, it is in great shape, we were very comfortable there. Kim and Mary are phenomenal owners who will make sure that your stay in the area is all that it could be.

lastchance_cabin