Archive

Tag Archives: Jackson Cuda

America is awesome and we’re reminded of that fact every July 4th. What better way to celebrate our freedom than to go fishing. So Blake and I decided to head down to the marsh and scout out a new area we’ve never fished. It turned out to be one of those rare holidays when the weather was right to make the run down to the coast.

IMGP7477

It didn’t take long to get on a school of fish either. The tidal range was pretty good on the 4th and we were met with a hard, rising tide in the marsh. Blake and I set ourselves up in a cut where the water was moving at a pretty good clip. You could see small shrimp popping out of the water and fish slashing/rolling just under the surface attacking those shrimp. My first cast with a topwater produced a nice trout. Then it was ON. We proceeded to catch trout and ladyfish (and one big pinfish) on almost every cast for about 4 hours. A lot of undersized fish, but a lot of fun on the fly rod.

IMGP7478

IMGP7479

IMGP7480

I initially was throwing a Top Dog and watching fish blow it up, which was a blast. Then I switched to the fly rod where a small charlie outfished everything else. Then I set up a popper/dropper type set up with a wiggle minnow top fly and the charlie bottom fly. Ended up with several doubles. I’ve never been on a school of fish like we were on in the marsh. It was amazing, a ton of fun.

Just as the bite was slowing down at our spot, a storm came through to the South of us that looked a bit menacing, with a couple of different fingers coming down threatening to touch ground, but never actually making the connection. After that passed we pressed on into the marsh, hoping to find some redfish we could sight fish.

IMGP7481

IMGP7483

Sheepshead were every where, big ones too, but they were just as stubborn as ever and I couldn’t get one to eat. I caught one red on the fly and blew a shot at a few others. I caught this black drum on the fly as well. Blake ended up catching a few on a spinnerbait. Conditions weren’t great for sight fishing as the water was high in the marsh and the sky was thick with cloud cover. Another storm came through to the south and had us heading back toward our launch.

Before we called it a day, we stopped at a different spot where the water was moving, similar to our first stop of the day. Blake had witnessed some boaters earlier in the day catch a few redfish at this spot and wanted to try it out. Lo and behold the redfish were stacked in this bayou. We easily limited out, catching slot sized redfish one right after another. The water was DEEP and the current strong, amplifying the already stellar fighting qualities of a 20″ redfish. Any fish caught felt BIG, but when they were boated everything was under 24″. I caught a nice white trout in that spot as well thinking I had a monster speck on – the fish was 13″.

OLYMPUS DIGITAL CAMERA

OLYMPUS DIGITAL CAMERA

So what started out being a scout trip to the marsh to sight fish for reds ended up becoming a meat haul. We finished the day with a two man limit of reds and a one man limit of trout, including one trout that I caught on the fly that was big enough to enter into the CCA STAR tournament fly division. Now it won’t win me anything as it is not big enough to overtake 1st place, but it will get me entered into a raffle for a brand new TFO BVK. I never thought we would get on a school of trout like that in the marsh, in the summer. It was the most productive day I’ve ever had out of a kayak meat-wise. It was also a pretty diverse day with the two of us having caught redfish, speckled trout, black drum, ladyfish, pinfish, white trout,  flounder and needlefish. The fishing was just stupid easy, we basically sat in two spots and caught all the fish you see in the cooler below, from kayaks.

IMGP7485

IMGP7488

When cleaning reds, it is always fun to cut open the stomach and see just what they’ve been eating, most of these red’s stomachs were empty, one had a small crab in it (majority of the time all I find are crabs – good to know if you want to “match the hatch”, so to speak). This red below had something a little different. An entire jig head/soft plastic set up. Who ever tied this bait on tied a horrible knot. The hook was in good shape too, so it could have been from the same day we were there.

IMGP7486

What a day! It started off at 3am with us heading down I-10 and ended with us frying fish at the house. Thanks to all the men and women out there who serve our country and fight to protect our freedoms on this day and every day. Days like this wouldn’t be possible without them.

I had documented this process on the Cuda prior to the last IFA event, but I deleted all the pictures off my camera before the tournament since it wass catch-photo-release and I wanted to give the judges a clean card to look through. So today I had it all planned out, I would film and document what it takes to install the mesh cargo panels on the Coosa. You can pick these up at your local Jackson dealer or through their online store. Well I filmed it, but it was too dark (I was in a poorly lit garage while it rained), so the film came out lousy. Then the install was so easy that I failed to take pictures of all the steps because I just breezed right through. Definitely a one beer job.

Here goes what I do have.

First, gather the materials you’ll need to install them. That includes the boat. You’ll need a drill, 3/16 drill bit, hand riveter (essential tool for kayak anglers), and the mesh cargo panels (which come with the rivets and clips needed to hold the net in place). Some folks will use marine goop as well to seal each rivet hole, but I don’t think it is necessary with the location of these holes.

IMGP7129

IMGP7130

Drill holes in the appropriate locations for your boat. For the Cuda it is 5 spots, pretty straight forward. After you drill the holes you can rivet the clips into place. Make sure to press firmly against the kayak while you do. Keep squeezing that handle until you hear it pop.

IMGP7138

4 holes for the Coosa, and you actually need to place the holes for the top clips on top the boat, so it doesn’t interfere with the low position spot of the seat. Also watch when you are drilling the lower holes to not hit the flush mount rod holders.

IMGP7134

IMGP7133

Then all you have to do is stretch the mesh net over the clips

IMGP7140

IMGP7132

IMGP7143

See, I told you it was easy. If I can do it, you can do it.