Archive

Monthly Archives: November 2013

After a month of waiting, Fall N Tide VIII finally took place this past Saturday down in Venice, Louisiana. My wife never ceases to amaze me and this time it was by graciously allowing me to make the trip down so that I could try and defend my slam title from last year. I’m not sure of many other women whom would have felt the same way with a two week old in the house. That’s why she’s the best!

I made the drive down Friday afternoon, which didn’t leave me any time to fish that day, but it did give me time to enjoy rush hour traffic through New Orleans! At least I had plenty of time to make the captain’s meeting and bounce a few strategies off my kayak fishing cohorts.

IMG_1816

After all was said and done I decided to see if I could make lightning strike twice and cover the same area I did last year, hoping the fish would be in a similar pattern. It was a safe spot to try with the forecast high winds, but I was a little unsure with the tournament being postponed a full month. Cold fronts have begun to move through South Louisiana and water temps have dropped quite a bit. It is an area however that I’m most familiar with in Plaquemines Parish, so with familiarity comes comfort and that strategy paid off last year so what the heck.

As it turned out the weathermen were wrong and things ended up being much nicer than the forecast (that never happens). I stayed with my strategy and went to work much like last year, looking for flounder and trout. As the morning progressed it was becoming evident that neither the trout or the flounder were there, so it was time to move on.

I paddled out and hit spot after spot after spot looking for trout and not finding a single one. It was downright pathetic. By lunch time I don’t think I even had a fish to the boat and had only missed one strike. I decided to head to an area that might be better for redfish and fish it back to the launch.

IMG_1821

Of course as I decide to finally dedicate time to redfish the winds decide to pick up and make sightfishing difficult. Shortly after lunch I caught my first red in a little marsh cut, 22″. Keep prying that area for flounder as it was a series of cuts and drains, habitat that flounder typically frequent, but caught nothing. I moved on to a flat I know I’d have luck on, but I also knew it rarely held upper slot reds – the kind you need for a tournament, but at this point I just wanted to salvage the day and catch some fish.

As soon as I got there I was into fish – go figure. I probably could have spent all day here picking up reds until I had a leopard or one of those coveted 26.99″ fish, but I didn’t leave myself enough time. I finished out my limit and headed back to the launch. The best redfish I had went 24.5″ and had 5 spots.

IMG_1824

Fishing was tough for me early on and for awhile there it was smelling skunky, but I was glad the redfish were there in the afternoon to bail me out. I went to the weigh in knowing that I probably didn’t have a shot, but you never know, so you always weigh your fish. Sure enough my red came up short in both categories and it wasn’t even close. The redfish category had some of the heaviest slot reds I’ve ever seen weighed in.  The winner, Jason Austin, brought in a slot red that went 8.73lbs! The rest of the results are below:

Cajun Slam

1. Rick Dembrun – 11.38 lbs

2. Brendan Bayard – 11.06 lbs

3. Tommy Eubanks – 11.05 lbs

4. David Torregrossa – 9.92 lbs

5. Donnie Elliot – 9.7 lbs

6. Mark Delatte – 9.37 lbs

7. Sherman Walker – 9.24 lbs

Redfish

1. Jason Austin – 8.73 lbs
2. Joseph Chevalier – 8.12 lbs
3. Sean Rasanis – 7.92 lbs
4. Adam Rockweiler – 7.89 lbs
5. Brian Sherman – 7.83 lbs

Trout

1. Smokey Cook – 3.32 lbs
2. Devon Beltz – 3.18 lbs
3. Joe Cantino – 2.87 lbs
4. Eric Muhoberac – 2.65 lbs
5. Chris Holmes – 2.43 lbs

Flounder

1. Toby Armond – 3.6 lbs
2. Steve Neece – 2.79 lbs
3. Gary Williamson – 1.64 lbs
4. Danny Ziegler – 1.21 lbs
5. Todd Lewis – 1.14 lbs

Leopard Red

1. Clayton Shilling – 11 spots
2. Eric Stacey – 10 spots
3. Jonathan Craft – 10 spots
4. Kenneth Owings – 10 spots
5. Nathan Grammes – 10 spots

Ladies Slam

Barbara Johnston – Red 6.76 lbs, Trout 1.11 lbs

Kids

Rory Craft – Trout 0.73 lbs

A big congrats to all the winners and a big thanks to all those that helped make the tournament possible. It takes a lot of volunteer work on the part of BCKFC officers and members to make events like this happen and often times it’s a thank-less job. It’s cool to see a lot of names on the leaderboard that I don’t recognize. The sport continues to grow and as it does it brings in a lot of great fishermen which will make each tournament down the road that much more competitive. These things should be a lot of fun for years to come.

One last thing I have to point out is that Rick also paddles a Cuda 12, so for two years in a row the slam division at Fall N Tide was taken by someone piloting a Jackson Kayak!

IMG_0255

Ours included a nice little surprise. I’m pleased to announce the arrival of Marin Elizabeth. 9 days early, she weighed in at 7 lbs even and measured 19 in. We made it home from the hospital Monday night and mom and baby are doing very well. I’ll probably never see as much time on the water as I have in the past few years because let’s be honest, who could leave that beautiful girl for any extended amount of time?

I’ve had a few requests recently to show how I mount my camera while in the kayak. If you’re looking to get the “over-the-shoulder” angle that you see in most of my videos, this is how it’s done. You can see the angle here:

 

If you use a milkcrate or a BlackPak or anything else that gives you vertical rod holders in the tankwell than this set up will be simple and effective for you. If not they are different products out there that will achieve the same results. I’ve been happy with the products available from YakAttack.

Here’s how I do it – first let’s take a look at the milkcrate:

IMGP8397

IMGP8398

It’s a standard milkcrate that I’ve attached 4 rod holders to. With the 2 that come standard in the Cuda 12, I have 6 total vertical rod holders behind me, which is plenty of storage for rods, a net, and a camera mount. The rod holders were purchased at Academy and are fairly inexpensive. Make sure to install the rodholders as snug as possible to the milkcrate as any looseness will allow for camera shake. Try not to overtighten though because you’re mounting them to plastic, which can, and will break. If you screw them in like I have, use flathead screws to allow for your camera mount to slide in the holder, also use washers on the backside to distribute the load.

Next you will need a pole of some sort that will fit in the rod holder. I use an extension pole that I bought at either Lowe’s or Home Depot. The extension pole came at the suggestion of either Drew Gregory or Sean Brodie, who have been filming much longer than I have and are much better at it as well. The extension pole allows for higher camera angles if I want to do something different, but I’ve found that I just use the lowest possible one because the higher the angle, the more the shake. You also have to turn the camera on and off somehow and it’s easier to reach when it’s lower.

IMGP8412

IMGP8400

IMGP8402

IMGP8403

IMGP8404

As you can tell from the photos the extension pole doesn’t fit snug in the rod holder, and if it’s not snug the camera will shake. I wrapped the end that goes into the rod holder with Gorilla tape, but regular old duct tape will work, or you can get creative and figure out another way to bulk up the bottom of the extension pole. Tape is nice because you can layer until you get the right amount or reduce if you’ve put too much on there.

Now you’ve got a pole in a rodholder that’s attached to your milkcrate in the tankwell of your kayak. You still need to mount your camera to the pole. I use a GoPro Hero 1 to film. I got it a few years back and it is still kicking so no need to upgrade yet. The GoPro is nice because it is easy to use, comes in a waterproof housing and has several accessories that make mounting it easy. The best way I’ve found to mount a GoPro to an extension pole is with their handlebar/seatpost mount.

IMGP8406

IMGP8405

IMGP8407

IMGP8409

IMGP8410

That mount will slide over the extension pole with ease and you can tighten it as much as possible to prevent slippage. The angle of the GoPro you see there is what I generally film at. With the wide angle lens on the GoPro you don’t have to point it downward too much at all to capture everything in front.

IMGP8411

That’s all there is to it. It’s simple, snug, and fairly inexpensive. I don’t see too much shake whether I’m sitting or standing in the kayak. You will want to make sure that you use the provided tankwell bungees to strap the milkcrate down, you don’t want it sliding. Here’s how it looks in the kayak:

 

IMG_1660

 

IMG_0592

IMGP7791